[LAC-TF] Re: Tunnel Broker: problem with msql-2.0.3
Pablo Allietti
pablo at lacnic.net
Tue Jul 20 15:30:24 BRT 2004
On Tue, Jul 20, 2004 at 11:10:30AM -0400, Christian Lazo R. wrote:
> Pablo
> disculpa me exprese mal
> lo que no nos funciono fue el software de TILAB Tunel Broker, la base de
> datos pudo ser instalada pero fallo la instalacion de TB.
a todos:
este tema se esta siguiendo en privado para no cargar la lista de logs y
demas despues que terminemos con alguna conclusion la pondremos aqui por si alguien la necesita.
saludos.
>
> Saludos
> Christian
>
> ----- Original Message -----
> From: "Pablo Allietti" <pablo at lacnic.net>
> To: <lactf at lac.ipv6tf.org>
> Sent: Tuesday, July 20, 2004 11:16 AM
> Subject: [LAC-TF] Re: Tunnel Broker: problem with msql-2.0.3
>
>
> > On Tue, Jul 20, 2004 at 10:49:57AM -0400, Christian Lazo R. wrote:
> > > Pablo
> > > si pudieras seria de gran ayuda.
> > >
> > > Nosotros ya probamos instalando versiones mas nuevas de la Bdatos y no
> nos
> > > funciono,
> > >
> >
> > aca recien termino de instalar la ultima version de msql 3.5 sin
> > problemas alguno. como dije antes en un FC2. lo unico que modifique fue
> > el instdir del script site.mm despues de eso me resulto todo ok.
> >
> > lo mismo para mysql lo cual prefiero todo ok sin problemas,
> >
> > es raro que en fc1 tengas problemas con msql siendo las 2 plataformas
> > iguales ya que gcc no cambio en casi ningun aspecto.
> >
> > aca la estructura de directorio que me genera
> >
> > [root at sony msql3]# pwd
> > /usr/tmp/pablo/msql3
> > [root at sony msql3]# ls -lpa
> > total 52
> > drwxr-xr-x 11 daemon root 4096 Jul 20 12:00 ./
> > drwxr-xr-x 20 root root 4096 Jul 20 12:00 ../
> > drwxr-xr-x 2 root root 4096 Jul 20 12:00 bin/
> > drwxr-xr-x 2 root root 4096 Jul 20 12:00 doc/
> > drwxr-xr-x 3 root root 4096 Jul 20 12:00 include/
> > drwxr-xr-x 2 root root 4096 Jul 20 12:00 lib/
> > drwxr-xr-x 2 root root 4096 Jul 20 12:00 makegen/
> > drwxr-xr-x 2 root root 4096 Jul 20 12:00 misc/
> > drwxr-xr-x 2 root root 4096 Jul 20 12:00 modules/
> > -rw-r--r-- 1 root root 1179 Jul 20 12:00 msql.conf
> > drwxr-xr-x 3 daemon root 4096 Jul 20 12:00 msqldb/
> > -rwxr-xr-x 1 root root 2380 Jul 20 12:00 README
> > drwxr-xr-x 2 root root 4096 Jul 20 12:00 www/
> >
> >
> > Pd: Para ser mas claros que BD intentastes instalar y cuales fueros los
> > errores? corristes un make test cuando da error? que dio ?
> >
> > >
> > > Saludos
> > >
> > > Christian
> > >
> > >
> > > ----- Original Message -----
> > > From: "Pablo Allietti" <pablo at lacnic.net>
> > > To: <lactf at lac.ipv6tf.org>
> > > Sent: Monday, July 19, 2004 9:30 AM
> > > Subject: [LAC-TF] Re: Tunnel Broker: problem with msql-2.0.3
> > >
> > >
> > > > On Fri, Jul 16, 2004 at 07:17:31PM -0400, mramirez at inf.uach.cl wrote:
> > > > > hola a todos, mi nombre es manuel y soy nuevo en la lista.
> > > >
> > > > hice la instalacion lo cual me genero los mismos problemas que a ti
> > > > teniendo FC2, para lo cual o GCC es muy nuevo, o msql 2 esta
> descontinuado
> > > > desde el anio 2001.
> > > >
> > > > Es necesario que sea el 2.X ?
> > > > El 3 compila perfecto en estas plataformas.
> > > >
> > > > si el 2.x es necesario le busco la solucion aca tengo otros gcc mas
> > > > viejos pero no se si tanto como para compilar algo del 2001 si queres
> lo
> > > > pruebo.
> > > >
> > > >
> > > >
> > > >
> > > > http://www.hughes.com.au/download/download.ehtml
> > > >
> > > >
> > > > mi gcc
> > > >
> > > > [root at sony msql-2.0.3]# gcc -v
> > > > Reading specs from /usr/lib/gcc-lib/i386-redhat-linux/3.3.3/specs
> > > > Configured with: ../configure --prefix=/usr --mandir=/usr/share/man
> > > > --infodir=/usr/share/info --enable-shared --enable-threads=posix
> > > > --disable-checking --disable-libunwind-exceptions --with-system-zlib
> > > > --enable-__cxa_atexit --host=i386-redhat-linux
> > > > Thread model: posix
> > > > gcc version 3.3.3 20040412 (Red Hat Linux 3.3.3-7)
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > >
> > > > > La maquina en que se intenta compilar msql-2.0.3 es la siguiente:
> > > > >
> > >
> ****************************************************************************
> > > **********************
> > > > > Distribucion : Fedora Core1
> > > > > Linux redes.ipv6.cl 2.4.22-1.2115.nptl #1 Wed Oct 29 15:42:51 EST
> 2003
> > > > > i686 GNU/Linux
> > > > >
> > > > > model name : Intel(R) Pentium(R) 4 CPU 1.80GHz
> > > > > MemTotal: 482180 kB
> > > > > SwapTotal: 594364 kB
> > > > >
> > > > > gcc: gcc32 (GCC) 3.2.3 20030422 (Red Hat Linux 3.2.3-6)
> > > > > libgcc - GCC version 3.3 shared support library
> > > > >
> > > > > los logs son los siguientes:
> > > > > 1. Primer paso descomprimir y realizar el make target para que msql
> > > > > identifique el entorno
> > > > >
> > > > >
> > > > > [root at redes msql-2.0.3]# make target
> > > > >
> > > > >
> > > > > Making target directory for Linux-2.4.22-1.2115.nptl-i686
> > > > >
> > > > > Building directory tree.
> > > > > Adding common
> > > > > Adding conf
> > > > > Adding lang-common
> > > > > Adding lite
> > > > > Adding makedepend
> > > > > Adding makegen
> > > > > Adding msql
> > > > > Adding regexp
> > > > > Adding tests
> > > > > Adding tests/rtest.src
> > > > > Adding w3-msql
> > > > > Adding w3-msql/tests
> > > > >
> > > > > Adding sym-links
> > > > >
> > >
> ............................................................................
> > >
> ............................................................................
> > > ..........
> > > > >
> > > > > Build of target directory for Linux-2.4.22-1.2115.nptl-i686 complete
> > > > >
> > > > > 2. realizar el ./setup desde dentro del directorio
> > > > > targets/Linux-2.4.22-1.2115.nptl-i686/
> > > > >
> > > > > [root at redes Linux-2.4.22-1.2115.nptl-i686]# ./setup
> > > > >
> > > > > Starting configuration of mSQL 2.
> > > > >
> > > > > checking for gcc
> > > > > checking for return type of signal handlers
> > > > > checking for ranlib
> > > > > checking for bison
> > > > > checking for sysconf
> > > > > checking for strdup
> > > > > checking for rindex
> > > > > checking for random
> > > > > checking for bcopy
> > > > > checking for getdtablesize
> > > > > checking for strsignal
> > > > > checking for ftruncate
> > > > > checking for setrlimit
> > > > > checking for madvise
> > > > > checking for msync
> > > > > checking for strncasecmp
> > > > > checking for mktemp
> > > > > checking for snprintf
> > > > > checking for strptime
> > > > > checking for strerror
> > > > > checking for -lsocket
> > > > > checking for -lnsl
> > > > > checking for -lgen
> > > > > checking for -lx
> > > > > checking for -ldl
> > > > > checking for sys/sockio.h
> > > > > checking how to run the C preprocessor
> > > > > checking for dlfcn.h
> > > > > checking for sys/dir.h
> > > > > checking for dirent.h
> > > > > checking for netinet/in_systm.h
> > > > > checking for select.h
> > > > > checking for sys/select.h
> > > > > checking for sys/un.h
> > > > > checking for strings.h
> > > > > checking for sys/timeb.h
> > > > > creating config.status
> > > > > creating site.mm
> > > > > creating makegen/makegen.cf
> > > > > creating common/config.h
> > > > > common/config.h is unchanged
> > > > >
> > > > > checking your directory stuff. Using dirent.h and struct dirent
> > > > > checking mmap(). Your mmap() is fine.
> > > > > checking for sys_errlist. You're fine.
> > > > > checking for u_int. You're fine.
> > > > > checking for int32_t and friends. You're fine.
> > > > > checking for ssize_t. You're fine.
> > > > > checking for a working getrlimit. You're fine.
> > > > >
> > > > > Ready to build mSQL.
> > > > >
> > > > >
> > > > >
> > > > > You may wish to check "site.mm" although the defaults should be
> > > > > fine. When you're ready, type "make all" to build the software
> > > > >
> > > > > 3. El site.mm contiene lo siguiente:
> > > > >
> > > > >
> > > > > [root at redes Linux-2.4.22-1.2115.nptl-i686]# cat site.mm
> > > > > # Generated automatically from site.mm.in by configure.
> > > > > #
> > > > > # Site specific configuration
> > > > > #
> > > > >
> > > > >
> > > > > COMPILER= gcc
> > > > > INST_DIR= /usr/local/Hughes
> > > > > HAVE_DYNAMIC= -DHAVE_DYNAMIC
> > > > > CC_ONLY_FLAGS=
> > > > > LINK_ONLY_FLAGS=
> > > > >
> > > > >
> > > > > #
> > > > > # Things below here shouldn't need to be changed
> > > > > #
> > > > > CC= $(COMPILER) $(CC_ONLY_FLAGS)
> > > > > LINK= $(COMPILER) $(LINK_ONLY_FLAGS)
> > > > > CPP= gcc -E
> > > > > RANLIB= ranlib
> > > > >
> > > > > YACC= bison -y
> > > > >
> > > > > SIGLIST=
> > > > > DIRENT= -DHAVE_DIRENT_H -DHAVE_DIRENT
> > > > > MMAP= -DHAVE_MMAP
> > > > > U_INT= -DHAVE_U_INT
> > > > > SSIZE_T= -DHAVE_SSIZE_T
> > > > > BITTYPES= -DHAVE_BIT_TYPES
> > > > > SYS_ERR= -DHAVE_SYS_ERRLIST
> > > > > TARGET= Linux-2.4.22-1.2115.nptl-i686
> > > > > WORKING_RLIMIT= -DHAVE_RLIMIT_NOFILE
> > > > >
> > > > > # Extra libraries if required
> > > > > EXTRA_LIB= -lnsl -ldl
> > > > >
> > > > > # Any other CFlags required
> > > > > EXTRA_CFLAGS= -DHAVE_CONFIG_H $(SSIZE_T) $(U_INT) $(BITTYPES)
> > > > >
> > > > > # Directory for pid file
> > > > > PID_DIR=
> > > > >
> > > > > CFLAGS= -O -I$(TOP)/ $(EXTRA_CFLAGS)
> > > > > LDLIBS= -L$(TOP)/lib $(EXTRA_LIB)
> > > > >
> > > > > 4. Al compilar (make all), los errores son los siguientes:
> > > > > --> [msql] directory
> > > > > make[2]: Cambiando a directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/msql'
> > > > >
> > > > > Regenerating Makefile.
> > > > >
> > >
> ............................................................................
> > >
> ............................................................................
> > > .......
> > > > > Done.
> > > > > Done.
> > > > > make[3]: Cambiando a directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/msql'
> > > > >
> > >
> gcc -O -I../ -DHAVE_CONFIG_H -DHAVE_SSIZE_T -DHAVE_U_INT -DHAVE_BIT_TYPES
> > > > > -DHAVE_DIRENT_H -DHAVE_DIRENT -DHAVE_MMAP
> > > > > -DINST_DIR='"/usr/local/Hughes"'
> > > > > -DTARGET='"Linux-2.4.22-1.2115.nptl-i686"' -DHAVE_RLIMIT_NOFILE -c
> > > > > libmsql.c
> > > > >
> > >
> gcc -O -I../ -DHAVE_CONFIG_H -DHAVE_SSIZE_T -DHAVE_U_INT -DHAVE_BIT_TYPES
> > > > > -DHAVE_DIRENT_H -DHAVE_DIRENT -DHAVE_MMAP
> > > > > -DINST_DIR='"/usr/local/Hughes"'
> > > > > -DTARGET='"Linux-2.4.22-1.2115.nptl-i686"' -DHAVE_RLIMIT_NOFILE -c
> net.c
> > > > >
> > >
> gcc -O -I../ -DHAVE_CONFIG_H -DHAVE_SSIZE_T -DHAVE_U_INT -DHAVE_BIT_TYPES
> > > > > -DHAVE_DIRENT_H -DHAVE_DIRENT -DHAVE_MMAP
> > > > > -DINST_DIR='"/usr/local/Hughes"'
> > > > > -DTARGET='"Linux-2.4.22-1.2115.nptl-i686"' -DHAVE_RLIMIT_NOFILE -c
> > > > > config.c
> > > > > config.c:74: error sintáctico antes de "__extension__"
> > > > > config.c:74: `__len' no se declaró aquí (no en una función)
> > > > > config.c:74: el elemento inicializador no es constante
> > > > > config.c:74: error sintáctico antes de "if"
> > > > > config.c:74: tipos en conflicto para `__retval'
> > > > > config.c:74: declaración previa de `__retval'
> > > > > config.c:74: warning: la definición de datos no tiene tipo o clase
> de
> > > > > almacenamiento
> > > > > config.c:74: error sintáctico antes del elemento '}'
> > > > > make[3]: *** [config.o] Error 1
> > > > > make[3]: Saliendo directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/msql'
> > > > > make[2]: *** [all] Error 2
> > > > > make[2]: Saliendo directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/msql'
> > > > > <-- [msql] done
> > > > >
> > > > > --> [lang-common] directory
> > > > > make[2]: Cambiando a directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/lang-c
> > > ommon'
> > > > >
> > > > > Regenerating Makefile.
> > > > >
> > >
> ............................................................................
> > > ..........
> > > > > Done.
> > > > > Done.
> > > > > make[3]: Cambiando a directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/lang-c
> > > ommon'
> > > > >
> > > > > bison -y -d parser.y
> > > > > parser.y:235.9: syntax error, unexpected "|"
> > > > > make[3]: *** [parser.c] Error 1
> > > > > make[3]: Saliendo directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/lang-c
> > > ommon'
> > > > > make[2]: *** [all] Error 2
> > > > > make[2]: Saliendo directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/lang-c
> > > ommon'
> > > > > <-- [lang-common] done
> > > > >
> > > > > --> [w3-msql] directory
> > > > > make[2]: Cambiando a directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/w3-msq
> > > l'
> > > > >
> > > > > Regenerating Makefile.
> > > > >
> > >
> ............................................................................
> > > .............
> > > > > Done.
> > > > > Done.
> > > > > make[3]: Cambiando a directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/w3-msq
> > > l'
> > > > > make[3]: *** No hay ninguna regla para construir el objetivo
> > > > > `../lang-common/y.tab.h', necesario para `mod_w3msql.o'. Alto.
> > > > > make[3]: Saliendo directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/w3-msq
> > > l'
> > > > > make[2]: *** [all] Error 2
> > > > > make[2]: Saliendo directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/w3-msq
> > > l'
> > > > > <-- [w3-msql] done
> > > > >
> > > > > --> [lite] directory
> > > > > make[2]: Cambiando a directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/lite'
> > > > >
> > > > > Regenerating Makefile.
> > > > > ..........................................................
> > > > > Done.
> > > > > Done.
> > > > > make[3]: Cambiando a directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/lite'
> > > > >
> > >
> gcc -O -I../ -DHAVE_CONFIG_H -DHAVE_SSIZE_T -DHAVE_U_INT -DHAVE_BIT_TYPES
> > > > > -I../lang-common -DHAVE_DYNAMIC -c mod_lite.c
> > > > >
> > >
> gcc -O -I../ -DHAVE_CONFIG_H -DHAVE_SSIZE_T -DHAVE_U_INT -DHAVE_BIT_TYPES
> > > > > -c -o ../lang-common/mod_std.o ../lang-common/mod_std.c
> > > > > ../lang-common/mod_std.c:65: tipos en conflicto para `sys_errlist'
> > > > > /usr/include/bits/sys_errlist.h:28: declaración previa de
> `sys_errlist'
> > > > > make[3]: *** [../lang-common/mod_std.o] Error 1
> > > > > make[3]: Saliendo directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/lite'
> > > > > make[2]: *** [all] Error 2
> > > > > make[2]: Saliendo directorio
> > > > >
> > >
> `/root/tunnel/needed/msql-2.0.3/targets/Linux-2.4.22-1.2115.nptl-i686/lite'
> > > > > <-- [lite] done
> > > > >
> > > > > Make of mSQL-2 complete.
> > > > > You should now install mSQL-2 using make install
> > > > >
> > > > >
> > >
> ****************************************************************************
> > > *****************************
> > > > > Finalmente al realizar el make install los errores son los mismos
> por lo
> > > > > que los binarios no se crean por lo que no se puede utilizar el TB,
> > > alguno
> > > > > de ustedes sabe como puedo solucionar este problema.
> > > > >
> > > > > cualquier sugerencia sera muy bien recibida.
> > > > >
> > > > > saludos,
> > > > > :: manuel ::
> > > > >
> > > > >
> > > > > On Thu, Jul 15, 2004 at 12:20:46PM -0400, Christian Lazo R. wrote:
> > > > > > Vale...
> > > > > > el problema puntual lo tengo con la instalacion de la version de
> la
> > > Bdatos.
> > > > >
> > > > > tenes un log o que error te envia ?
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > >
> > > > > > te lo agaradeceria.
> > > > > >
> > > > > > un saludo
> > > > > >
> > > > > > Christian
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > From: "JORDI PALET MARTINEZ" <jordi.palet at consulintel.es>
> > > > > > To: <lactf at lac.ipv6tf.org>
> > > > > > Sent: Thursday, July 15, 2004 12:01 PM
> > > > > > Subject: Re: [LAC-TF] IPv6 news - weekly summary
> > > > > >
> > > > > >
> > > > > > > Hola Christian,
> > > > > > >
> > > > > > > Se que ha habido mucha gente que ha implementado el de TILAB y
> no
> > > han
> > > > > > tenido problemas, pero si quieres te puede poner en contacto con
> los
> > > > > > desarrolladores para que les preguntes directamente.
> > > > > > >
> > > > > > > Saludos,
> > > > > > > Jordi
> > > > > > >
> > > > > > > ----- Original Message -----
> > > > > > > From: "Christian Lazo R." <clazo at inf.uach.cl>
> > > > > > > To: <lactf at lac.ipv6tf.org>
> > > > > > > Sent: Thursday, July 15, 2004 5:53 PM
> > > > > > > Subject: Re: [LAC-TF] IPv6 news - weekly summary
> > > > > > >
> > > > > > >
> > > > > > > > Amigos
> > > > > > > > Alguno de ustedes tiene implementado un tunnel Broker?
> > > > > > > > tengo problemas con la implementacionde TILAB, especificamente
> con
> > > la
> > > > > > Base
> > > > > > > > de datos. msql2.0.3
> > > > > > > >
> > > > > > > > alguine me puede ayudar?
> > > > > > > >
> > > > > > > > saludos
> > > > > > > >
> > > > > > > > Christian.
> > > > > > > >
> > > > > > > > ----- Original Message -----
> > > > > > > > From: "JORDI PALET MARTINEZ" <jordi.palet at consulintel.es>
> > > > > > > > To: "ipv6cluster List Member" <ipv6cluster at ist-ipv6.org>;
> > > > > > > > <members at ipv6forum.com>; <tf-sc at ipv6tf.org>;
> > > > > > <ipv6.tf at ipv6-taskforce.org>;
> > > > > > > > <ipv6 at madridwireless.net>; <press.ipv6 at consulintel.es>;
> > > > > > > > <foro at es.ipv6tf.org>; <lactf at lac.ipv6tf.org>
> > > > > > > > Sent: Monday, July 12, 2004 10:42 AM
> > > > > > > > Subject: [LAC-TF] IPv6 news - weekly summary
> > > > > > > >
> > > > > > > >
> > > > > > > > > A model of Internet standards adoption: the case of IPv6
> > > > > > > > >
> > > > > > > >
> > > > > >
> > >
> http://www.ist-ipv6.org/modules.php?op=modload&name=News&file=article&sid=629
> > > > > > > > >
> > > > > > > > > Your phone will be with you. always
> > > > > > > > >
> > > > > > > >
> > > > > >
> > >
> http://www.ist-ipv6.org/modules.php?op=modload&name=News&file=article&sid=630
> > > > > > > > >
> > > > > > > > > Indonesian IPv6 Conference
> > > > > > > > >
> > > > > > > >
> > > > > >
> > >
> http://www.ist-ipv6.org/modules.php?op=modload&name=News&file=article&sid=628
> > > > > > > > >
> > > > > > > > > Foundry Double Winner
> > > > > > > > >
> > > > > > > >
> > > > > >
> > >
> http://www.ist-ipv6.org/modules.php?op=modload&name=News&file=article&sid=631
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > **********************************
> > > > > > > > > Madrid 2003 Global IPv6 Summit
> > > > > > > > > Presentations and videos on line at:
> > > > > > > > > http://www.ipv6-es.com
> > > > > > > > >
> > > > > > > > > This electronic message contains information which may be
> > > privileged
> > > > > > or
> > > > > > > > confidential. The information is intended to be for the use of
> the
> > > > > > > > individual(s) named above. If you are not the intended
> recipient
> > > be
> > > > > > aware
> > > > > > > > that any disclosure, copying, distribution or use of the
> contents
> > > of
> > > > > > this
> > > > > > > > information, including attached files, is prohibited.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > _______________________________________________
> > > > > > > > > LACTF mailing list
> > > > > > > > > LACTF at lac.ipv6tf.org
> > > > > > > > > http://lacnic.net/mailman/listinfo/lactf
> > > > > > > >
> > > > > > > > _______________________________________________
> > > > > > > > LACTF mailing list
> > > > > > > > LACTF at lac.ipv6tf.org
> > > > > > > > http://lacnic.net/mailman/listinfo/lactf
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > **********************************
> > > > > > > Madrid 2003 Global IPv6 Summit
> > > > > > > Presentations and videos on line at:
> > > > > > > http://www.ipv6-es.com
> > > > > > >
> > > > > > > This electronic message contains information which may be
> privileged
> > > or
> > > > > > confidential. The information is intended to be for the use of the
> > > > > > individual(s) named above. If you are not the intended recipient
> be
> > > aware
> > > > > > that any disclosure, copying, distribution or use of the contents
> of
> > > this
> > > > > > information, including attached files, is prohibited.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > _______________________________________________
> > > > > > > LACTF mailing list
> > > > > > > LACTF at lac.ipv6tf.org
> > > > > > > http://lacnic.net/mailman/listinfo/lactf
> > > > > >
> > > > > > _______________________________________________
> > > > > > LACTF mailing list
> > > > > > LACTF at lac.ipv6tf.org
> > > > > > http://lacnic.net/mailman/listinfo/lactf
> > > > > ---end quoted text---
> > > > >
> > > > > --
> > > > > _______________________________________________
> > > > > LACTF mailing list
> > > > > LACTF at lac.ipv6tf.org
> > > > > http://lacnic.net/mailman/listinfo/lactf
> > > > ---end quoted text---
> > > >
> > > > --
> > > >
> > > > Pablo Allietti
> > > >
> > > > LACNIC
> > > >
> > > > Registro de Direcciones de Internet para America Latina y el Caribe
> > > > Registro de Enderecamento de Internet para America Latina e Caribe
> > > > Latin American and Caribbean Internet Addresses Registry
> > > >
> > > >
> > > > _______________________________________________
> > > > LACTF mailing list
> > > > LACTF at lac.ipv6tf.org
> > > > http://lacnic.net/mailman/listinfo/lactf
> > >
> > > _______________________________________________
> > > LACTF mailing list
> > > LACTF at lac.ipv6tf.org
> > > http://lacnic.net/mailman/listinfo/lactf
> > ---end quoted text---
> >
> > --
> >
> > Pablo Allietti
> >
> > LACNIC
> >
> > Registro de Direcciones de Internet para America Latina y el Caribe
> > Registro de Enderecamento de Internet para America Latina e Caribe
> > Latin American and Caribbean Internet Addresses Registry
> >
> >
> > _______________________________________________
> > LACTF mailing list
> > LACTF at lac.ipv6tf.org
> > http://lacnic.net/mailman/listinfo/lactf
>
> _______________________________________________
> LACTF mailing list
> LACTF at lac.ipv6tf.org
> http://lacnic.net/mailman/listinfo/lactf
---end quoted text---
--
Pablo Allietti
LACNIC
Registro de Direcciones de Internet para America Latina y el Caribe
Registro de Enderecamento de Internet para America Latina e Caribe
Latin American and Caribbean Internet Addresses Registry
More information about the LACTF
mailing list